You are here

RP1020: Journal Article: Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer

The main purpose of this research is to study the time dependent behaviour of a geopolymer concrete. The geopolymer binder is composed of 85.2 % of low calcium fly ash and only 14.8 % of ground granulated blast furnace slag. Both drying shrinkage and creep are studied. In addition, different curing conditions at elevated temperature were used. All experimental results were compared to predictions made using the Eurocode 2. The curing regime plays an important role in the magnitude and development of both creep and drying shrinkage of class F fly ash based geopolymer concrete. A minimum of 3 days at 40 °C or 1 day at 80 °C is required to obtain final drying shrinkage strains similar to or less than those adopted by Eurocode 2 for ordinary Portland cement (OPC) concrete. Creep strains were similar or less than those predicted by Eurocode 2 for OPC concrete when the geopolymer concrete was cured for 3 days at 40 °C. After 7 days at 80 °C, creep strains became negligible.

Read the full article here: DOI: 10.1617/s11527-015-0599-1

RP1020: Reducing Barriers for Commercial Adaptation of Construction Materials with Low-Embodied-Carbon